installation material for G125-28 BE1.3 V2
-
1.
Installation material oil burner BE (8718585037)
-
2.
Cylinder head screw DIN912 M5x12 (10x) (63022871)
-
3.
Cylinder-head screw DIN7984 M8x25 8.8 A3 (8718584683)
-
4.
Washer 13x18x1,5 (5x) (8718584808)
-
5.
Compres spring DIN2098 1,8x12,5x36 (7747012279)
-
6.
O-ring 92x3 (63002998)
-
8.
cable feed D 14/4mm (8718584650)
-
9.
cable feed D 29x11x4 (8718584656)
Accuracy of Information
Worcester Bosch has taken all reasonable care in the preparation of the contents of this website and intends that the information is accurate at the time it is uploaded. However, such information can be subject to change and therefore we do not warrant its accuracy. Particulars are for illustration only. We operate a policy of continuous product development and individual features may vary from time to time. Consequently, these particulars should be treated as general guidance only and do not constitute a contract, part of a contract, or a warranty. You should take appropriate steps to verify any information upon which you wish to rely. Worcester Bosch shall not be liable for damages of any kind or nature whatsoever arising out of or related to the use of this website or the information it contains.