Pump/Hydraulic valve for DANESMOOR 15/19-RSO-GB OIL SYS

Product
Parts

Download exploded view Print this page Share this page via email

1. Pump Head UPMO 7m c/w Inst Plug (8716120416)
1. Pump Assembly UPMO 7m GG 1-1/2 (8716120453)
2. Pipe - central heating flow (87161002920)
3. Pipe - pressure relief (87161005680)
4. Pipe - heat exchanger to pump (87161001710)
5. Valve Pr.Rel.1/2 x15mm x 1/8 (87161424160)
6. Valve 22mm x 1-1/2 (87161424170)
7. Gauge pres.50mmx1/8back 4bar (87161423580)
8. Washer 15mm (thick) (87161409170)
9. G 3/8 tail (87161402330)
10. Nut g1/2 (87161402360)
11. Washer (87161409120)
12. Brass blanking plug (87161402610)
13. Gasket 18,6x13,5x1,5 (10x) (87101030450)
13. Gasket 18.6 x 13.5 x 1.5 (1x) (87161156800)
14. Nut cap 15mm (87161402840)
16. Compession ring 3/4" (87161402960)
99. Installation plug (8737714592)

Accuracy of Information

Worcester Bosch has taken all reasonable care in the preparation of the contents of this website and intends that the information is accurate at the time it is uploaded. However, such information can be subject to change and therefore we do not warrant its accuracy. Particulars are for illustration only. We operate a policy of continuous product development and individual features may vary from time to time. Consequently, these particulars should be treated as general guidance only and do not constitute a contract, part of a contract, or a warranty. You should take appropriate steps to verify any information upon which you wish to rely. Worcester Bosch shall not be liable for damages of any kind or nature whatsoever arising out of or related to the use of this website or the information it contains.