Electrical Box Assembly for HEATSLAVE HE 18/25 INTERNAL
-
1.
Control box assembly (87161076390)
Before FD988 -
1.
Control box assembly (87186852580)
AFTER FD989 and Before FD111 -
1.
Control_Box Heatslave ASM (87186879680)
After FD112 -
2.
Facia assembly (87161076320)
Before FD988 -
2.
Facia assembly 18/25 (87186852870)
After FD989 and Before FD111 -
2.
Facia Assembly 18/25 (87186895780)
After FD112 -
3.
Programmer Infil Plate (87161053830)
-
4.
Facia inset plate pressure gauge (87161053810)
-
5.
Knob control (87161053850)
-
6.
Nut Captive No:8 (87161482040)
-
7.
Pressure gauge (87161076380)
-
8.
Lockout reset switch h83001ab (87161461610)
-
9.
Neon indicator red (87161054570)
-
10.
Thermostat control dhw (87161076370)
Before FD988 -
10.
Thermostat Control DHW (87186852830)
After FD989 and Before FD111 -
10.
Thermostat DHW Control (87186890600)
After FD112 -
11.
Thermostat Control Ch (87161076210)
-
12.
Thermosat high limit (87161076400)
-
13.
Clamp cable type kb2 insuloid (87161411010)
-
14.
Screw (10x) 8x1/2" (87161153060)
AFTER FD992 -
15.
Facia printed Heatslave 18/25 (87161076350)
-
16.
Plug hole heyco dp500 (87161411030)
-
18.
Grommet nylon open-close (87161410500)
-
19.
Screw M4x6 Taptite ZC PL P/H (10X) (29144114240)
Before FD991 -
20.
Manual Flue Thermostat (87161076240)
-
21.
Thermostat manual reset (87161076250)
-
22.
Heatslave control board 416601 (87161463010)
BEFORE FD 988 -
22.
PCB Greenstar Heatslave (87186852610)
AFTER FD 989 -
23.
Screw no8x9.5 type b recessed flg hd (87161019580)
-
24.
Harness - facia stat earth (87161077820)
-
25.
Harness - flue sensor (87161079420)
-
26.
Harness Main (87161079120)
-
27.
Harness circulation pump (87186852750)
AFTER FD 989 -
27.
PUMP HARNESS OIL H/S92-96 (87161115620)
BEFORE FD 988 -
27.
UPMO Pump Harness 950mm (8716122796)
-
28.
Pcb black nylon pillars (87161410600)
AFTER FD 989 -
29.
Thermostat LM7 tank limit (87186852690)
After FD989 and Before FD111 -
29.
Thermostat LM7 Tank Limit (87186886240)
After FD112 -
30.
Cap thermostat protection (87186853010)
AFTER FD 989
Accuracy of Information
Worcester Bosch has taken all reasonable care in the preparation of the contents of this website and intends that the information is accurate at the time it is uploaded. However, such information can be subject to change and therefore we do not warrant its accuracy. Particulars are for illustration only. We operate a policy of continuous product development and individual features may vary from time to time. Consequently, these particulars should be treated as general guidance only and do not constitute a contract, part of a contract, or a warranty. You should take appropriate steps to verify any information upon which you wish to rely. Worcester Bosch shall not be liable for damages of any kind or nature whatsoever arising out of or related to the use of this website or the information it contains.