Secondary Exchanger Assembly for DANESMOOR HE18/25OOOGB U'LITY
-
1.
Secondary heat exchanger final assembly (87161075120)
BEFORE FD 782 -
1.
Secondary Heat Exchanger Final Assembly (87161124300)
AFTER FD783 -
2.
Screw Hex Z M6 x 16 8.8 ZP (87161104470)
BEFORE FD 782 -
2.
Screw Hex Z M6 x 25 8.8 ZP (87161130660)
AFTER FD783 -
3.
Air vent manual 1/4 bsp (87161405160)
-
4.
Boiler drain tube (87161412190)
-
5.
Gasket secondary heat exchanger (87161081030)
BEFORE FD 782 -
5.
Seal SHE 16 tubes (87161129540)
AFTER FD783 -
6.
Baffle double secondary heat exchanger (87161081050)
-
7.
Air vent 1/8 bsp (87161402380)
-
8.
washer 30.5x22.2x1.5 (87161409200)
-
9.
Pipe ch return (87161085030)
-
10.
Nut clamping g1 (87161402470)
-
11.
Pipe female secondary (87161085040)
-
12.
O-Ring 3.0 sec x 21.5 i/d e.p. (87161408260)
-
13.
Pipe male secondary (87161085050)
-
16.
Bolt retainer M6 (87161075290)
-
18.
Seal Heat Exchanger (87161124900)
BEFORE FD 782 -
99.
Insulation secondary top (87161089370)
-
99.
Insulation secondary bottom (87161089380)
-
99.
Tape at500 silver 50mm x 5m (87161420010)
Accuracy of Information
Worcester Bosch has taken all reasonable care in the preparation of the contents of this website and intends that the information is accurate at the time it is uploaded. However, such information can be subject to change and therefore we do not warrant its accuracy. Particulars are for illustration only. We operate a policy of continuous product development and individual features may vary from time to time. Consequently, these particulars should be treated as general guidance only and do not constitute a contract, part of a contract, or a warranty. You should take appropriate steps to verify any information upon which you wish to rely. Worcester Bosch shall not be liable for damages of any kind or nature whatsoever arising out of or related to the use of this website or the information it contains.