Secondary Heat Exchanger for DANESMOOR HE50/70OOOGB U'LITY
-
1.
Heat exchanger secondary 31 final assy (87161076880)
BEFORE FD 881 -
1.
Secondary ht exchanger 31 tube final ass (87186806390)
After FD 882 -
2.
Screw hex slot m8x20 8.8zp (29111312420)
-
3.
Washer Fibre 38 x 28 x 2 (87161080340)
-
4.
Gasket secondary heat exchanger (87161081090)
Before FD882 -
4.
Seal-31 tube secondary (87186800930)
After FD881 -
5.
Air vent 1/8 bsp (87161402380)
-
6.
Baffle double secondary heat exchanger (87161081050)
-
7.
Baffle single secondary heat exchanger (87161081060)
-
8.
Pipe assembly flow (87186802690)
After FD 882 -
8.
Pipe assembly flow (87161080300)
BEFORE FD 881 -
9.
Air vent manual 1/4 bsp (87161405160)
-
10.
Tube drain (87161099310)
-
11.
Plug 1/8 taper (87161103870)
-
12.
Ring Compression 28mm (87161563590)
BEFORE FD 881 -
12.
O-Ring 27.8 x 3.6mm (87186802570)
After FD 882 -
13.
Capnut 28mm (87161480420)
BEFORE FD 881 -
13.
Clip retaining (87186812610)
After FD 882 -
14.
Connector block (87186806380)
AFTER FD882 -
15.
Vent Air (87186832750)
-
18.
Pipe return (87186802800)
Accuracy of Information
Worcester Bosch has taken all reasonable care in the preparation of the contents of this website and intends that the information is accurate at the time it is uploaded. However, such information can be subject to change and therefore we do not warrant its accuracy. Particulars are for illustration only. We operate a policy of continuous product development and individual features may vary from time to time. Consequently, these particulars should be treated as general guidance only and do not constitute a contract, part of a contract, or a warranty. You should take appropriate steps to verify any information upon which you wish to rely. Worcester Bosch shall not be liable for damages of any kind or nature whatsoever arising out of or related to the use of this website or the information it contains.