Manifold for DANESMOOR HE50/70OOOGB U'LITY
-
1.
Manifold final assembly (87186805940)
After FD 881 -
1.
Manifold final assembly (87161088660)
BEFORE FD 882 -
2.
Seal Flue Cowl (87186803440)
After FD 881 -
2.
Gasket manifold (87161081100)
BEFORE FD 882 -
3.
Screw hex slot m8x20 8.8zp (29111312420)
-
4.
Thermostat pocket assembly (87161076970)
-
5.
Steel split pin 45mm x 1.5mm (87161550470)
-
6.
Screw M5 X 20 cap s/s (29180701620)
-
7.
Nut M5 (29150110060)
-
8.
Flue seal manifold (87161098010)
-
9.
Manifold access door (87161082730)
BEFORE FD 882 -
9.
Manifold door (87186805930)
After FD 881 -
10.
Screw M5 x 10 Pozi Pan HD Clear Pass. (29123011520)
-
11.
Spring baffle (87161095260)
-
12.
Plug 1/8" (87161081080)
-
13.
Seal-31 tube secondary (87186800930)
After FD881 -
13.
Gasket secondary heat exchanger (87161081090)
Before FD882 -
99.
Washer Condensate Pipe (87161101740)
-
99.
Trap condensate assembly (87186828300)
-
99.
Pipe Assembly Condensate Trap (87186828320)
Accuracy of Information
Worcester Bosch has taken all reasonable care in the preparation of the contents of this website and intends that the information is accurate at the time it is uploaded. However, such information can be subject to change and therefore we do not warrant its accuracy. Particulars are for illustration only. We operate a policy of continuous product development and individual features may vary from time to time. Consequently, these particulars should be treated as general guidance only and do not constitute a contract, part of a contract, or a warranty. You should take appropriate steps to verify any information upon which you wish to rely. Worcester Bosch shall not be liable for damages of any kind or nature whatsoever arising out of or related to the use of this website or the information it contains.