Cam 5 Wall Hung Heat Exchanger for CAM 5 WH 50/70 EXTERNAL

Product
Parts

Download exploded view Print this page Share this page via email

3. Burner 50/70 WH tested (87161089450)
4. Burner flange (87161080510)
5. Burner Gasket (87161086820)
7. Burner bracket Insulation WH50/70 (87161086780)
8. Inspection Cover Complete (87161086200)
9. Rope-thermoseal type6 19mm dia (87161407330)
10. inspection Cover Insulation (87161086220)
11. Clevis pins 1/4 x 5/8 (87161086800)
12. R Clip (87161086790)
13. Screw M5 x 25 Cheese Hd (29100111640)
14. Washer 3/16 x 1" steel (87161072990)
16. Washer M8 large od (87161072980)
17. Set screw m10 x 16 (29110607550)
18. Screw m5 x 25 counter-sunk slot head (87161094240)
19. Bolt M8 X 25 HEX HEAD (29110612440)
20. Nut burner location (87161080530)
21. Washer m8 form a ms zinc plate (29160110150)
22. Nut M8 Full Hex M/S ZC PL (29150110090)
23. Washer M10 (29160118960)
24. Nut m10 hex full brass (87161094270)
29. Quarl plate insulation (87161086260)
30. Washer m5 flat (29160110120)
31. Nut M5 (29150110060)
33. 1/2" Drain cock (87161084850)

Accuracy of Information

Worcester Bosch has taken all reasonable care in the preparation of the contents of this website and intends that the information is accurate at the time it is uploaded. However, such information can be subject to change and therefore we do not warrant its accuracy. Particulars are for illustration only. We operate a policy of continuous product development and individual features may vary from time to time. Consequently, these particulars should be treated as general guidance only and do not constitute a contract, part of a contract, or a warranty. You should take appropriate steps to verify any information upon which you wish to rely. Worcester Bosch shall not be liable for damages of any kind or nature whatsoever arising out of or related to the use of this website or the information it contains.