Superstructure for 28CDI-FSN-GB NAT GAS COMBI
-
1.
Screw M4 x 10mm Taptite Scr ZC PL P/H (29144114080)
-
2.
Nut Captive No:8 (87161482040)
-
3.
Seal-air vent (87161407040)
-
4.
Retaining bolt lh (87161482000)
-
5.
Retaining bolt rh (87161482010)
-
6.
Nut-wing m5 ms zn pl table 2 (29151911050)
-
7.
Retaining bolt guide (87161000970)
-
10.
Combustion front insulation (87161422000)
-
11.
Combustion side insulation (87161422020)
-
12.
Combustion chamber front-sides (87161000210)
-
13.
Primary h.w. thermistor clip (87161483030)
-
14.
Ntc/thermister dhw (87161423020)
-
15.
Gas-water heat exchanger (87161428000)
-
16.
Overheat thermostat (87161423030)
-
17.
Screw m3x6mm zc pl p/h taptite (29144114110)
-
19.
Screw (10x) 8x1/2" (87161153060)
-
20.
Pipe - air vent (87161200470)
-
21.
Air-vent automatic 3/8 (ss kit) (87161405000)
-
22.
O-ring 15,54x2,62 (87161408050)
-
23.
Clamp spring (87161483170)
-
24.
O-ring 17,86x2,62 (10x) (87161408060)
-
25.
Inner casIng cover assembly (87161202540)
-
26.
Seal (87161006400)
-
27.
Main burner aeroMatic (87161426030)
-
28.
Seal-burner manifold (87161407030)
-
29.
Injector - spares set (87161402230)
-
30.
Electrode spark (87161051860)
AFTER FD292 -
30.
Spark electrode assembly (87161421000)
BEFORE FD291 -
31.
Flame sence electrode and harness (87161203450)
-
33.
Pipe - primary return (87161203320)
-
34.
Nut m4 extended (87161401020)
-
35.
Burner gauze (87161426010)
-
36.
Fan assembly (87161202820)
-
37.
Harness - fan (87161202850)
-
38.
Screw iso no 6b x 9.5 recessed (29124212100)
-
39.
Air flow sensor (87161410000)
-
40.
Pipe - air pressure switch (87161000030)
-
41.
SEAL-18MM TUBE (87161407050)
-
99.
Combustion insulation pack (77161922040)
-
99.
Open vent cover plate c/w seal (87161002370)
-
99.
Clip - spring ref mfo319 soft (5X) (87161405130)
-
99.
Impeller for fan (87161412200)
Accuracy of Information
Worcester Bosch has taken all reasonable care in the preparation of the contents of this website and intends that the information is accurate at the time it is uploaded. However, such information can be subject to change and therefore we do not warrant its accuracy. Particulars are for illustration only. We operate a policy of continuous product development and individual features may vary from time to time. Consequently, these particulars should be treated as general guidance only and do not constitute a contract, part of a contract, or a warranty. You should take appropriate steps to verify any information upon which you wish to rely. Worcester Bosch shall not be liable for damages of any kind or nature whatsoever arising out of or related to the use of this website or the information it contains.