Superstructure / Case for 35CDI II-FSP-GB LPG COMBI
-
3.
Panel assembly - cabinet bottom (87161026520)
-
4.
Cover assembly c/w seal - inner casing (87161026410)
-
5.
Screw (10x) 8x1/2" (87161153060)
-
7.
Insulation - combustion chamber front (87161026380)
-
8.
Insulation - combuston chamber rear (87161028790)
-
10.
Insulation park (87161462760)
-
11.
Retaining bolt rh (87161482010)
-
12.
Retaining bolt lh (87161482000)
-
13.
Retaining bolt guide (87161000970)
-
14.
Nut-wing m5 ms zn pl table 2 (29151911050)
-
15.
Expansion_vessel (87161425000)
-
16.
Retaining button (5 pack) (87161410350)
-
17.
Flue hood assembly (87161026400)
-
18.
Nut Captive No:8 (87161482040)
-
19.
Blanking cap red (87161412110)
-
20.
Air flow sensor (87161410000)
-
20.
Flue sampling tube kit (87161402490)
-
21.
Flue spigot (87161015920)
-
22.
Screw no.8x12 hex pozi (87161550730)
-
23.
Seal-air vent (87161407040)
-
26.
Stud 2ba brass ball new design (87161405120)
-
27.
Clip - spring ref mfo319 soft (5X) (87161405130)
-
28.
Screw M4 x 10mm Taptite Scr ZC PL P/H (29144114080)
-
29.
Panel - cabinet top (87161026430)
Accuracy of Information
Worcester Bosch has taken all reasonable care in the preparation of the contents of this website and intends that the information is accurate at the time it is uploaded. However, such information can be subject to change and therefore we do not warrant its accuracy. Particulars are for illustration only. We operate a policy of continuous product development and individual features may vary from time to time. Consequently, these particulars should be treated as general guidance only and do not constitute a contract, part of a contract, or a warranty. You should take appropriate steps to verify any information upon which you wish to rely. Worcester Bosch shall not be liable for damages of any kind or nature whatsoever arising out of or related to the use of this website or the information it contains.