Primary Heat Exchanger for DANESMOOR EXTERNAL 18/25 ERP

Product
Parts

Download exploded view Print this page Share this page via email

1. Heat_exchanger Painted (18-25kW) Regular (87186806930)
2. Baffle Assembly (87186813770)
3. Rope Seal (87186887090)
4. Access Door Assembly (87186882690)
5. Washer m10 (29160111140)
6. Nut M10 (29150110100)
7. Flue Support Bracket (87186825260)
8. Screw Hex Z M6 x 25 8.8 ZP (87161130660)
9. Gasket-Burner mounting flange (87161128710)
10. Flange 70/90 Econ (87161126620)
11. Washer m8 form a ms zinc plate (29160110150)
12. Nut M8 Full Hex M/S ZC PL (29150110090)
13. Pocket t/stat 27-3 (87161402450)
14. Steel split pin 45mm x 1.5mm (87161550470)
15. Valve Oil Line (8716119692)
16. 1/2" Drain cock (87161084850)
17. Rivet Plastic Bush (87186908080)
18. O-Ring 3.0 sec x 21.5 i/d e.p. (87161408260)
19. Clip - retaining (87161483220)
20. Nut burner location (87161080530)
21. Bolt M8 X 25 HEX HEAD (29110612440)
30. Screw 3,5x6,5 DIN7981 (10x) (29106194090)
99. Insulation Access Door (8716119036)
99. Insulation Jacket PHE (87186900380)
99. Insulation Jacket Front (87186902880)

Accuracy of Information

Worcester Bosch has taken all reasonable care in the preparation of the contents of this website and intends that the information is accurate at the time it is uploaded. However, such information can be subject to change and therefore we do not warrant its accuracy. Particulars are for illustration only. We operate a policy of continuous product development and individual features may vary from time to time. Consequently, these particulars should be treated as general guidance only and do not constitute a contract, part of a contract, or a warranty. You should take appropriate steps to verify any information upon which you wish to rely. Worcester Bosch shall not be liable for damages of any kind or nature whatsoever arising out of or related to the use of this website or the information it contains.